EasyManua.ls Logo

Krups EF 472 - Programming and Resetting Fill Levels

Krups EF 472
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ServiceManualEF472
11
O P E R A T I O N S
3.3 Programmingthefilllev el
3.4 Resettingthefilllevelt othe factorydefault
The fill level of the
cups has been pre-
set by the manufacturer.
Small cup ............. 40ml
Large cup ........... 110ml
1) Preparecoffeeasusual(see"Making
acupofcoffee"onpage10),butkeep
thecoffeebuttonpressedforatleast
threesecondsinordertostart
programmingmode.
2) Onlyreleasethebuttonwhenthe
desiredfilllevelisreached.
Theprocedureisthesameforboth
cupsizes(filll evel10750ml).
1) Switchoffthecoffeemachine. 2) Pressandholdthe"Largecup"button.
3) Switchonthecoffeemachine.
4) Releasethebutton

Related product manuals