EasyManua.ls Logo

Krups EF 472 - Operations; Filling the Water System

Krups EF 472
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ServiceManualEF472
9
O P E R A T I O N S
3 O P E R A T I O N S
3.1 Fillingthewatersystem
If the coffee
machine cannot
pump water although
there is water in the tank,
the water circuit may be
empty (also refer to page
12).
Requirements:
Thecoffeemachineisswitchedonand
hasheatedup.
1) Pressthe"Largecup"button.
 Thepumpstartstowork.
2) Opentheclosinghandle,pushitback
wardstothestopandholditinthis
positionforapproximately3seconds.
3) CheckIfanywaterleaksfromthecap
suleinlet.
A small amount of
steam may seep
through the capsule bay.
4) Closethehandleimmediatelyifa
leakageisvisible.
5) Pressthe"Largecup"buttonagainto
stopthepump.
 Thecoffeemachineisnowready.

Related product manuals