Krups EF 472 - Replacing On;Off Switch and Mains Cable

ServiceManualEF472
28
R E P A I R S
5.8 Replacingtheon/offswitchand/orthemains
cable
Repairtips
• Checktheassemblypositionofthespring(14).
• Removetheinsulationhousing(23):placescrewdrivertipfrombelowintotheswitch
housingandforcetheswitchout(62).
• Theonoffswitch(62)hasnomarkingsfortheconnections.Checkitsswitchfunc
tionsandwiringwithadigitalmultimeter(j)andcompareitwiththediagram(see
"Wiringdiagrams"onpage29).
• Thecablestrainrelief(37)isundertension.Therefore,holdthecablestrainrelief
withyourfingerwhenunlatchingit.