KSB Multi Eco - Opening a Consumer Installation; Setting the Start-Up und Stop Pressures (Multi Eco Top Only)

6 Commissioning/Start-up/Shutdown
31 of 60
Multi Eco
6.1.3 Opening a consumer installation
1. Open a consumer installation.
6.1.4 Setting the start-up und stop pressures (Multi Eco Top only)
1. Set start-up pressure P1.
Fig.5: Setting start-up pressure P1
2. Set differential pressure P.
Fig.6: Pressure control
P1 Start-up pressure of pump P2 Stop pressure of pump
ΔP Differential pressure