26
Contrast setting Setting of work mode
Setting of system volt. Level Setting of system freq. level
Setting of auto turn-on Setting of bypass freq.rang
Setting of bypass volt. Upper limit Setting of bypass volt. Lower limit
520KVA 23-05-2013
◄ Setting Record Version ►
Work Mode Single
System Voltage Level 220V
System Frequence Level
50H
Auto Turn-on
Ena
Bypass Frequence Range
2%
Bypass Volt. Upper Limit
Back
Bypass Volt. Lower Limit -30
O/P Volt Regulation 0% Next
520KVA 23-05-2013
◄ Setting Record Version ►
Work Mode Single
System Voltage Level 220V
System Frequence Level
50
Auto Turn-on
Ena
Bypass Frequence Range
2%
Bypass Volt. Upper Limit
Back
Bypass Volt. Lower Limit -3
O/P Volt Regulation 0%
520KVA 23-05-2013
◄ Setting Record Version ►
Work Mode Single
System Voltage Level 220V
System Frequence Level
50
Auto Turn-on
Ena
Bypass Frequence Range
2%
Bypass Volt. Upper Limit
10% Back
Bypass Volt. Lower Limit
-3
O/P Volt Regulation 0%
Next
320KVA 23-05-2013
◄ Setting Record Version ►
Work Mode Single
Method Normal
System Voltage Level 220V
System Frequence Level
50HZ
Auto Turn-on
Enable
Bypass Frequence Range
2%
Bypass Volt. Upper Limit
Back
Bypass Volt. Lower Limit -30%
520KVA 23-05-2013
◄ Setting Record Version ►
Work Mode Single
System Voltage Level 220V
System Frequence Level
50
Auto Turn-on
Enable
Bypass Frequence Range
2%
Bypass Volt. Upper Limit 10% Back
Bypass Volt. Lower Limit -30
O/P
Volt Regulation 0% Next
520KVA 23-05-2013
◄ Setting Record Version ►
Work Mode Single
System Voltage Level 220V
System Frequence Level
50
Auto Turn-on
Ena
Bypass Frequence Range
2%
Bypass Volt. Upper Limit
Back
Bypass Volt. Lower Limit -30
O/P Volt Regulation 0% Next
520KVA 23-05-2013
◄ Setting Record Version ►
System Voltage Level 220V
System Frequence Level
50
Auto Turn-on
Ena
Bypass Frequence Range
2%
Bypass Volt. Upper Limit
Back
Bypass Volt. Lower Limit -30
O/P Volt Regulation 0% Next
520KVA 23-05-2013
◄ Setting Record Version ►
Parallel ID 01
Enable
Float Volt Revise
0.001
Parallel Amount
04
Internal Module amount 05 Back
Next
Command
System Volt. Level
Ensure Cancel
System Freq. Level
Ensure Cancel
3 Command
Command
Auto Turn-on
Ensure Cancel
Bypass Freq. Range
Ensure Cancel
Command
BPV. Upper Limit
Ensure Cancel
Command
Ensure Cancel
Command
Command
Ensure Cancel
Parallel ID
Ensure Cancel
Command