CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. S.r.l. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091114 – COMPACK 2 ECO / SPECIAL - REV. 08 - DATE 10/2020 page 26 of 63
7 INSTALLATION
7.1 CHARACTERISTICS AND STORAGE CONDITIONS
During periods of inactivity, before being unpacked (storage), the compressor must be kept at a
temperature of between +5 °C and +45 °C.
If the compressor has remained inactive for a long period of time, before starting it up again, change
the oil and check function.
7.2 TRANSPORT
To ensure that the unit is protected and does not incur shipping damages, the compressor is covered
with a cardboard box.
All shipping information is printed on the compressor package (data and pictograms).
7.3 UNPACKING
When unpacking the unit, carefully check that the contents match what is indicated in the shipping
documents.
The user must dispose of packaging in compliance with current national regulations.
The machine must be unpacked by qualified personnel using suitable tools.
To Next Page
Loading...
