KTC COMPACK 2 SPECIAL - Description of the Operations to be Performed; Starting the Compressor

CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. S.r.l. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091114 – COMPACK 2 ECO / SPECIAL - REV. 08 - DATE 10/2020 page 42 of 63
9.3 DESCRIPTION OF THE OPERATIONS TO BE PERFORMED
9.3.1 STARTING THE COMPRESSOR
When machine is powered it appears the following flashing screen:
for few seconds, then:
________________________________________________________________________________
By pressing
it appears the following flashing screen:
for few seconds, then the machine start to load. It appears the value of system pressure.