CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written authorization. K.T.C. S.r.l. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091114 – COMPACK 2 ECO / SPECIAL - REV. 08 - DATE 10/2020 page 16 of 63
5 DATA AND TECHNICAL SPECIFICATION
* When the environmental temperature is below 5°C, an ISO VG 32 lubricant must be used
** Value detected with the respective max working pressure
*** Noise measured in an open field at 1 metre from the unit ±3 dB(A) at maximum working pressure
Oil injected screw compressor
Flow rate (ISO 1217:2009 annex C)**
Maximum power consumption**
Max. air/oil outlet temperature
Max. environmental temperature
Min. environmental temperature*
40 kg – 88 lb
46 kg – 101,4 lb (2,5 lt)
52 kg – 114,6 lb (trolley)
78 kg – 172 lb (90lt)
40 kg – 88 lb
46 kg – 101,4 lb (2,5 lt)
52 kg – 114,6 lb (trolley)
78 kg – 172 lb (90lt)
40 kg – 88 lb
46 kg – 101,4 lb (2,5 lt)
52 kg – 114,6 lb (trolley)
78 kg – 172 lb (90lt)
40 kg – 88 lb
46 kg – 101,4 lb (2,5 lt)
52 kg – 114,6 lb (trolley)
78 kg – 172 lb (90lt)
Max. current consumption**
Electric motor protection rating
To Next Page
Loading...
