CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. S.r.l. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091114 ā COMPACK 2 ECO / SPECIAL - REV. 08 - DATE 10/2020 page 51 of 63
10.3 REPLACING OIL SEPARATOR FILTER
Replace the oil separator filter after the number of hours indicated in the manual or after checking
its differential pressure. To do so, open the upper half-shell and remove the filter cartridge using the
special spanner. Then replace the spent cartridge with a new one.
Before screwing down the oil separator cartridge, oil the gasket.
Manually screw down the new cartridge.
To Next Page
Loading...
