16 ELECTRICAL SYSTEM 167
16.8 Refitting the headlight mask with the headlight
S00294-11
Main work
–
Connect connector
1
of the headlight.
– Check that the lighting is functioning properly.
– Position the headlight mask.
S00293-11
–
Mount and tighten screws
2
.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the wind shield. ( p. 130)
–
Install the mask spoiler. x ( p. 123)
– Install the tank cover. ( p. 128)
– Install the front side cover. ( p. 119)
– Mount the seat. ( p. 107)
– Check the headlight setting. ( p. 172)
To Next Page
Loading...
