KTM 1190 ADVENTURE R - Page 172

16 ELECTRICAL SYSTEM 170
– Remove the seat. ( p. 106)
– Remove the front side cover. ( p. 118)
– Remove the tank cover. ( p. 126)
–
Remove the mask spoiler. x ( p. 120)
– Remove the wind shield. ( p. 129)
– Remove the headlight mask with the headlight. ( p. 166)
S00295-10
Main work
–
Push headlight bulb
1
lightly into the bulb socket, turn it all the way counterclock-
wise, and pull it out.
–
Disconnect plug
2
.
S00296-10
–
Plug connector
2
into the new headlight bulb.
High beam (H11/socket PGJ19-2) ( p. 207)
–
Position headlight bulb
1
into the bulb socket and turn it all the way clockwise.
The headlight bulb is locked into the bulb socket.
Finishing work
– Refit the headlight mask with the headlight. ( p. 167)
– Install the wind shield. ( p. 130)