EasyManua.ls Logo

KTM 1190 RC8 R EU/UK 2009 - Installing the Rear Wheel

KTM 1190 RC8 R EU/UK 2009
242 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE WORK ON FRAME AND ENGINE 142
100723-01
Push the rear wheel as far forward as possible and then remove the chain from the rear
sprocket.
Warning
Danger of accidentsReduced braking effect caused by damaged brake discs.
Always lay the wheel down in such a way that the brake discs are not dam-
aged.
Take the rear wheel out of the swingarm carefully without damaging the rim or brake
disc.
Info
Do not operate the foot brake when the rear wheel is removed.
9.46Installing the rear wheel x
Warning
Danger of accidentsReduced braking efficiency due to oil or grease on the brake discs.
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidentsNo braking effect when operating the rear brake.
After installing the rear wheel, always operate the footbrake until the pressure point is reached.
Check the rear hub cush drive. x ( p. 144)

Table of Contents

Other manuals for KTM 1190 RC8 R EU/UK 2009

Related product manuals