CONTROLS 49
5.34SET NUM LAPS menu
400462-01
Condition
• The ignition is on.
• The motorcycle is upright.
– Press the button and the button for 3 - 5 seconds.
– Press the button twice until the symbol shows SETTINGS in the info display.
– Press the MODE button briefly.
– Press the button twice until the symbol shows SET NUM LAPS in the info display.
– Press the MODE button briefly.
On the SET NUM LAPS menu, you set the number of laps to cover in RACE mode.
Press the button . Increases the value
Press the button . Decreases the value
Press the button
and the button for
3 - 5 seconds.
No function
Press the MODE but-
ton for 3 - 5 sec-
onds.
Open and exit SET NUM LAPS
Press the MODE but-
ton briefly.
Open and exit SET NUM LAPS