MAINTENANCE WORK ON FRAME AND ENGINE 97
9.3Jacking up motorcycle rear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Always place the vehicle on a firm and even surface.
100680-10
– Insert the work stand adapter in the rear of the work stand.
Work stand adapter (61029055120)
Work stand rear (61029055100)
– Stand the motorcycle upright, align the work stand to the link fork and the adapters,
and jack up the motorcycle.
9.4Taking rear of motorcycle off work stand
Note
Danger of damage The parked vehicle can roll away or fall over.
– Always place the vehicle on a firm and even surface.
– Secure the motorcycle against falling over.
– Remove the work stand from the rear and lean the vehicle on the sidestand.
To Next Page
Loading...
