KTM 1190 RC8 R EU/UK 2009 - Installing the Oil Filter; Filling up with Engine Oil

MAINTENANCE WORK ON FRAME AND ENGINE 193
9.82Installing the oil filter x
100776-10
– Insert oil filter .
– Lubricate the O-ring of the oil filter cover. Mount oil filter cover .
– Mount and tighten the screws.
Guideline
Remaining engine screws M5 6 Nm (4.4 lbf ft)
9.83Filling up with engine oil x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
100777-10
– The oil must be topped up in two steps.
Engine oil 3.60 l (3.8 qt.) External
temperature:
≥ 0 °C (≥ 32 °F)
Engine oil
(SAE 10W/50)
( p. 228)
External
temperature:
< 0 °C (< 32 °F)
Engine oil (SAE
5W/40) ( p. 228)
– Remove the dipstick  and top up the engine oil.
Engine oil (1st
quantity)
3.00 l (3.17 qt.) External
temperature:
≥ 0 °C (≥ 32 °F)
Engine oil
(SAE 10W/50)
( p. 228)