3 WORK 16
3.1 Raising the motorcycle with a lift stand
401942-01
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
– Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
– Secure the motorcycle against falling over.
3.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
401943-10
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
–
To park the motorcycle, press side stand
to the ground with your foot and lean
the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with the
rubber band.
3.3 Removing the seat
V00342-10
–
Remove screws
.
– Raise the rear of the seat, pull the seat back, and lift it off.
3.4 Mounting the seat
V00343-10
– Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the
rear and push it forward.
– Make sure that the seat is correctly locked in.
To Next Page
Loading...
Need help?
General
