3 WORK 28
Total fuel tank
capacity, approx.
9.5 l
(2.51 US gal)
Super unleaded, type C (ROZ 95/RON
95/PON 91 mixed with 2-stroke engine
oil, 1:60) ( p. 32) (300 EXC BR)
Engine oil, 2-stroke ( p. 32)
– Close the filler cap. ( p. 27)
3.23 Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1 , TR2 , A1 , A2 and S1 are cleared when the unit of measure is changed.
Condition
The motorcycle is stationary.
400329-01
– Repeatedly press the button briefly until H appears at the bottom right of the
display.
– Press the button for 2–3 seconds.
The Setup menu is displayed and the active functions are shown.
–
Repeatedly press the button briefly until Km/h/Mph flashes.
Setting the Km/h
– Press the button .
Setting the Mph
– Press the button .
– Wait 3–5 seconds
The settings are stored.
Info
If no button is pressed for 10 -12 seconds, or if an impulse comes from
the wheel speed sensor, the settings are automatically saved and the setup
menu is closed.
3.24 Setting the speedometer functions
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
Condition
The motorcycle is stationary.
400318-01
– Repeatedly press the button briefly until H appears at the bottom right of the
display.
– Press the button for 2–3 seconds.
The Setup menu is displayed and the active functions are shown.
Info
If no button is pressed for 10–12 seconds, the settings are automatically
saved.
If no button is pressed for 20 seconds, or if an impulse comes from the
wheel speed sensor, the settings are automatically saved and the setup
menu is closed.
– Repeatedly press the button briefly until the desired function flashes.
The selected function flashes.
Activating the function
– Press the button .
The symbol continues to appear in the display and the next function
appears.
Deactivating a function
– Press the button .
The symbol disappears in the display and the next function appears.
To Next Page
Loading...
