KTM 1290 SUPERDUKE R - Page 195

23 TECHNICAL DATA 193
Nut, manifold on cylinder head M8 Tightening sequence:
Tighten the nuts evenly. Do
not warp the metal plate.
25 Nm (18.4 lbf ft)
–
Nut, rear sprocket M8 36 Nm (26.6 lbf ft) –
Nut, shift rod M8 12 Nm (8.9 lbf ft) –
Nut, shift rod M8LH 12 Nm (8.9 lbf ft) –
Nut, valve, angled M8 4 Nm (3 lbf ft) –
Remaining nuts, chassis M8 25 Nm (18.4 lbf ft) –
Remaining screws, chassis M8 25 Nm (18.4 lbf ft) –
Screw, axle clamp M8 15 Nm (11.1 lbf ft) –
Screw, bottom triple clamp M8 12 Nm (8.9 lbf ft) –
Screw, foot brake lever M8 20 Nm (14.8 lbf ft) Loctite
®
243™
Screw, front brake disc M8 30 Nm (22.1 lbf ft) Loctite
®
2701™
Screw, front rider footrest bracket M8 25 Nm (18.4 lbf ft) Loctite
®
243™
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft) –
Screw, ignition lock (tamper-proof
screw)
M8 25 Nm (18.4 lbf ft) –
Screw, rear brake caliper M8 25 Nm (18.4 lbf ft) Loctite
®
2701™
Screw, rear brake disc M8 30 Nm (22.1 lbf ft) Loctite
®
243™
Screw, shift lever on footrest bracket M8 20 Nm (14.8 lbf ft) Loctite
®
243™
Screw, shift shaft deflector on frame M8 10 Nm (7.4 lbf ft) Loctite
®
243™
Screw, side stand bracket M8 25 Nm (18.4 lbf ft) Loctite
®
243™
Screw, side stand spring M8 15 Nm (11.1 lbf ft) Loctite
®
2701™
Screw, steering damper on holder M8 8 Nm (5.9 lbf ft) Loctite
®
243™