KTM 1290 SUPERDUKE R - Trip 1; Trip 2

7 COMBINATION INSTRUMENT 53
7.9.2 "Trip 1"
401826-01
– Press the UP or DOWN button until the "Trip 1" menu appears on the matrix display.
"Trip 1" shows the distance since the last reset, such as between two refueling stops.
"Trip 1" runs continuously and counts the distance up to 9999.
"Ø Speed 1" indicates the average speed based on "Trip 1" and "Trip Time 1".
"Ø Cons 1" indicates the average fuel consumption based on "Trip 1" and "Trip Time 1".
"Trip Time 1" indicates the riding time based on "Trip 1" and starts running as soon as a
speed signal comes in.
"Fuel Range" indicates the possible range with the fuel reserve.
Press and hold
the button for
3–5 seconds.
All entries in the "Trip 1" menu are cleared.
7.9.3 "Trip 2"
401825-01
– Press the UP or DOWN button until the "Trip 2" menu appears on the matrix display.
"Trip 2" shows the distance since the last reset, such as between two refueling stops.
"Trip 2" runs continuously and counts the distance up to 9999.
"Ø Speed 2" indicates the average speed based on "Trip 2" and "Trip Time 2".
"Ø Cons 2" indicates the average fuel consumption based on "Trip 2" and "Trip Time 2".
"Trip Time 2" indicates the riding time based on "Trip 2" and starts running as soon as a
speed signal comes in.
"Fuel Range" indicates the possible range with the fuel reserve.
Press and hold
the button for
3–5 seconds.
All entries in the "Trip 2" menu are cleared.