KTM 1290 SUPERDUKE R - Setting the Shift Lever Stub

8 ERGONOMICS 69
–
Tighten nut

, holding the threaded rod

.
Guideline
Nut, shift rod M8LH 12 Nm (8.9 lbf ft)
8.9 Setting the shift lever stub
L01460-10
–
Remove screw

along with the shift lever stub.
–
Position the shift lever stub with the screw in one of the drilled holes

depending on
the desired lever length.
Guideline
Standard Middle hole
– Tighten the screw.
Guideline
Screw, shift lever stub M6 10 Nm
(7.4 lbf ft)
Loctite
®
243™