KTM 450 SX ATV 2010 User Manual

30/DISASSEMBLING THE ENGINE 108
301621-10
– Remove centering pins  and cylinder head gasket .
18.15Removing the water pump cover
301622-10
– Remove screws . Take off the water pump cover.
– Remove the gasket.
18.16Removing the clutch cover
301623-10
– Remove screw .
Info
If work is to be performed on the water pump, unscrew the nut of the water
pump impeller.
301624-10
– Mount special tool .
Assembly pin (77329012100) ( p. 231)
– Remove screws  and take off the clutch cover.
301625-10
– Remove the locating pins.
– Remove quad ring .
– Take off O-ring .
PartShark.com
877-999-5686

KTM 450 SX ATV 2010 Specifications

General

Brand	KTM
Model	450 SX ATV 2010
Category	Offroad Vehicle
Language	English