KTM RC 125 User Manual

14 WHEELS, TIRES 117
14.1 Removing the front wheel
Preparatory work
– Raise the motorcycle with the rear wheel stand. ( p. 78)
– Raise the motorcycle with the front wheel stand. ( p. 79)
L02193-10
Main work
(RC 200)
–
Loosen screw

and screws

.
–
Unscrew screw

about 6 turns and press your hand on the screw to push the
wheel spindle out of the axle clamp. Remove screw

.
Warning
Danger of accidents Reduced braking effect caused by damaged brake
discs.
– Always lay the wheel down in such a way that the brake discs are not
damaged.
– Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.
Info
Do not pull the hand brake lever when the front wheel is removed.

KTM RC 125 Specifications

General

Displacement	124.7 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Bore x Stroke	58 mm x 47.2 mm
Engine Type	Liquid-cooled, 1-cylinder, 4-stroke engine
Max Torque	12 Nm @ 8, 000 rpm
Front Suspension	WP upside-down fork
Rear Suspension	WP Monoshock
Front Brake	Single disc, 4-piston caliper
Rear Brake	Single disc, single-piston caliper
Frame	Steel trellis frame
Front Tire	110/70 R17
Rear Tire	150/60-17