KTM RC 125 User Manual

15 ELECTRICAL SYSTEM 132
L02157-11
–
Pull back the positive terminal cover

.
–
Disconnect positive cable

from the battery.
–
Detach rubber band

.
– Pull the battery up and out of the battery holder.
Info
Never operate the motorcycle with a discharged battery or without a battery. In
both cases, electrical components and safety devices can be damaged. The vehi-
cle is therefore no longer roadworthy.
15.2 Installing the battery
L02157-10
Main work
– Position the battery in the battery holder.
Guideline
The terminals of the battery must face upwards.
–
Attach rubber band

.
–
Position the positive cable

and mount and tighten the screw.
–
Position positive terminal cover

.

KTM RC 125 Specifications

General

Displacement	124.7 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Bore x Stroke	58 mm x 47.2 mm
Engine Type	Liquid-cooled, 1-cylinder, 4-stroke engine
Max Torque	12 Nm @ 8, 000 rpm
Front Suspension	WP upside-down fork
Rear Suspension	WP Monoshock
Front Brake	Single disc, 4-piston caliper
Rear Brake	Single disc, single-piston caliper
Frame	Steel trellis frame
Front Tire	110/70 R17
Rear Tire	150/60-17