16 COOLING SYSTEM 151
» If the coolant level does not meet specifications:
– Correct the coolant level.
Coolant ( p. 195)
– Mount the cap of the compensating tank.
L02266-11
–
Remove radiator cap
.
– Check the coolant antifreeze.
−25… −45 °C (−13… −49 °F)
» If the coolant antifreeze does not meet specifications:
– Correct the coolant antifreeze.
– Check the coolant level in the radiator.
The radiator must be completely filled.
» If the coolant level does not meet specifications:
– Correct the coolant level and find out the cause of the loss.
Coolant ( p. 195)
» If you had to add more coolant than the specified amount:
> 0.20 l (> 0.21 qt.)
– Fill/bleed the cooling system. ( p. 154)
– Mount the radiator cap.
Finishing work
– Install the right side cover. ( p. 104)
To Next Page
Loading...
