To Next Page

To Previous Page

23 TECHNICAL DATA 190

Remaining screws, chassis M5 5 Nm (3.7 lbf ft) –

Screw, ABS hose clamp (RC 125) M5 6 Nm (4.4 lbf ft) –

Screw, anti-rotation lock, handlebar stub M5 4 Nm (3 lbf ft) –

Screw, battery compartment M5 4 Nm (3 lbf ft) –

Screw, chain guard M5 7 Nm (5.2 lbf ft) Loctite

204™

Screw, cover in front of battery compart-

ment

M5 4 Nm (3 lbf ft) –

Screw, fuel pump M5 5 Nm (3.7 lbf ft) –

Screw, fuel tank cover M5 5 Nm (3.7 lbf ft) –

Screw, rollover sensor M5 6 Nm (4.4 lbf ft) Loctite

243™

Screw, side stand switch M5 5 Nm (3.7 lbf ft) Loctite

243™

Screw, tail end lower part M5 4 Nm (3 lbf ft) –

Cap bolt, footrest M6 9 Nm (6.6 lbf ft) –

Nut, foot brake lever adjustment M6 9 Nm (6.6 lbf ft) –

Nut, license plate bracket M6 8.5 Nm (6.27 lbf ft) –

Nut, shift rod M6 10 Nm (7.4 lbf ft) –

Nut, shift rod M6LH 10 Nm (7.4 lbf ft) –

Nut, tail light M6 7 Nm (5.2 lbf ft) –

Remaining nuts, chassis M6 10 Nm (7.4 lbf ft) –

Remaining screws, chassis M6 10 Nm (7.4 lbf ft) –

Screw, ABS module on ABS module

retaining bracket (RC 125)

M6 7 Nm (5.2 lbf ft) –

Screw, ABS module retaining bracket on

silent block (RC 125)

M6 7 Nm (5.2 lbf ft) –

Screw, air filter box lid M6 3 Nm (2.2 lbf ft) –

Other manuals for KTM RC 125

Questions and Answers:

Need help?

Do you have a question about the KTM RC 125 and is the answer not in the manual?

General

Displacement	124.7 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Bore x Stroke	58 mm x 47.2 mm
Engine Type	Liquid-cooled, 1-cylinder, 4-stroke engine
Max Torque	12 Nm @ 8, 000 rpm
Front Suspension	WP upside-down fork
Rear Suspension	WP Monoshock
Front Brake	Single disc, 4-piston caliper
Rear Brake	Single disc, single-piston caliper
Frame	Steel trellis frame
Front Tire	110/70 R17
Rear Tire	150/60-17