KTM RC 390 2019 User Manual

TUNING THE CHASSIS 12
105
12.2 Adjusting the rebound damping of the fork (R model)
Info
The hydraulic rebound damping determines the fork suspension behavior.
A00278-10
–
Turn adjusting screws
1
clockwise all the way.
Info
Adjusting screws
1
are located at the top end of the
fork legs.
– Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Rebound damping
Standard 12 clicks
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.

KTM RC 390 2019 Specifications

General

Engine Type	Single Cylinder, 4-Stroke, DOHC
Displacement	373.2 cc
Torque	36 Nm @ 7000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Brake	230mm disc, single-piston caliper
ABS	Yes
Fuel Tank Capacity	9.5 liters
Dry Weight	147 kg
Seat Height	820 mm
Frame	Steel trellis frame
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Ground Clearance	178 mm
Cooling System	Liquid cooled
Power	43.5 hp (32 kW) @ 9000 rpm
Front Suspension	WP USD 43 mm
Rear Suspension	WP Monoshock
Front Brake	320 mm disc
Top Speed	170 km/h (approx)