KTM RC 390 2019 - Cleaning the Dust Boots of the Fork Legs

SERVICE WORK ON THE CHASSIS 13
119
A00278-12
Main work
–
Release bleeder screws
1
.
Any excess pressure escapes from the interior of the fork.
– Tighten the bleeder screws.
Finishing work
– Take the motorcycle off the front lifting gear. ( p. 117)
– Remove the rear of the motorcycle from the lifting gear.
( p. 114)
13.6 Cleaning the dust boots of the fork legs
Preparatory work
– Raise the motorcycle with the rear lifting gear. ( p. 114)
– Lift the motorcycle with the front lifting gear. ( p. 115)