KTM RC 390 2019 User Manual

SERVICE WORK ON THE CHASSIS 13
133
V00602-10
– Push the chain up in the area behind the chain guide.
– Check the chain sliding guard for wear.
» If the chain sliding guard has lost material due to wear to
the extent that, in area
C
, the drilled hole of screw
1
is
visible from above:
– Change the chain sliding guard.
– Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
– Tighten screws on the chain sliding guard.
Finishing work
– Remove the rear of the motorcycle from the lifting gear.
( p. 114)
13.16 Removing the battery cover
Preparatory work
– Remove the front rider's seat. ( p. 121)

KTM RC 390 2019 Specifications

General

Engine Type	Single Cylinder, 4-Stroke, DOHC
Displacement	373.2 cc
Torque	36 Nm @ 7000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Brake	230mm disc, single-piston caliper
ABS	Yes
Fuel Tank Capacity	9.5 liters
Dry Weight	147 kg
Seat Height	820 mm
Frame	Steel trellis frame
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Ground Clearance	178 mm
Cooling System	Liquid cooled
Power	43.5 hp (32 kW) @ 9000 rpm
Front Suspension	WP USD 43 mm
Rear Suspension	WP Monoshock
Front Brake	320 mm disc
Top Speed	170 km/h (approx)