15 WHEELS, TIRES
168
V00162-12
–
Clean the thread of the wheel spindle and nut
3
.
– Clean and grease wheel spindle.
Long-life grease ( p. 259)
– Clean the contact areas on the brake caliper bracket and link
fork.
– Position the rear wheel.
The brake linings are correctly positioned.
– Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.
–
Pull the rear wheel back and mount wheel spindle
4
with the
washers and chain adjusters
5
.
Info
Mount left and right chain adjusters
5
in the same
position.
–
Mount nut
3
, but do not tighten it yet.
– Ensure that the chain adjusters lie flat on the screws and
tighten the nut
3
.
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
B
.
To Next Page
Loading...
