TRANSMISSION
B1830,B2230,B2530,B3030, WSM
3-S13
(3) Cruise Control
Cruise Control Adjustment
1. Before adjusting the cruise control adjustment, adjust the brake
pedal free travel (2) securely.
Check the cruise control is operated properly as follows.
• The cruise control lever is returned to "OFF" position "C" when
depressing two brake pedals simultaneously.
• The cruise control lever is still kept at "ON" position "B" when
depressing one side brake pedal.
If the cruise control is not operated properly as two conditions
mentioned above, adjust the cruise control as follows.
2. Depress the speed control pedal (HST pedal) fully, and set the
cruise control lever to "ON" position "B".
3. Remove the rear wheel (R.H.).
Case 1: When the cruise control lever is not returned to
"OFF" position "C" properly by depressing both brake
pedals, after connecting both the left and the right brake
pedals.
• Shorten the release rod (6) until the cruise control is returned to
"OFF" position "C".
Case 2: When the cruise control lever is not kept at "ON"
position (B) by depressing the one side brake pedal after
disconnecting the brake pedal lock (7) from the right brake
pedal.
• Lengthen the release rod (6) until the cruise control is kept at
"ON" position "B".
(Remarks)
• Since the cruise control adjustment range is very narrow, the
release rod length is shown as a reference below.
9Y1210003TRS0009US0
Brake pedal free
travel "A"
30 to 40 mm (1.18 to 1.57 in.) on the pedal
Keep the free travel in the right and the left brake pedals
equal.
Release rod length
"L" (Reference
valve)
B1830
B2230
B2530
534 mm
21.0 in.
B3030
594 mm
23.4 in.
(1) Brake Pedal, L.H.
(2) Brake Pedal, R.H.
(3) Speed Control Pedal (HST pedal)
(4) Cruise Control Lever
(5) Lock Plate
(6) Release Rod
(7) Brake Pedal Lock
A: Brake Pedal Free Travel
B: Cruise Control Lever "ON"
Position
C: Cruise Control Lever "OFF"
Position
D: Speed Control Pedal (HST pedal)
"Forward" Position
L: Release Rod Length
To Next Page
Loading...
