Kubota B1830 - Disassembling and Assembling; Front Case

TRANSMISSION
B1830,B2230,B2530,B3030, WSM
3-S33
[3] DISASSEMBLING AND ASSEMBLING
(1) Front Case
Front Case Assembly
1. Support the engine securely.
2. Remove the front case mounting bolts (1).
3. Remove the front case (1) from the frame (3).
(When reassembling)
• Apply liquid gasket (Three Bond 1206D or equivalent) to the
joint face of the engine and the front case.
9Y1210003TRS0040US0
Clutch Shaft and Ball Bearing
1. Remove the oil seal (7).
2. Remove the cir-clip (6).
3. Remove the clutch shaft (3) from the front case (2).
9Y1210003TRS0041US0
Tightening torque
Front case mounting bolt
for aluminum (M10)
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 lbf·ft
(1) Front Case
(2) Bolt
(3) Frame
(4) Bi-Speed Rod 1
(5) Delivery Pipe
(6) Propeller Shaft
(1) Steal Plate
(2) Front Case
(3) Clutch Shaft
(4) Ball Bearing
(5) External Cir-clip
(6) Internal Cir-clip
(7) Oil Seal
KiSC issued 05, 2012 A