Kubota M8540 Workshop Manual

5-S13
M8540, M9540, WSM
BRAKES
(2) Removing Master Cylinder (CABIN Model)
Bonnet
1. Open the bonnet (1) and disconnect the battery negative
terminal.
2. Disconnect the connector (2) for head lights.
3. Disconnect the dampers (3).
4. Remove the bonnet (1).
(When reassembling)
• The connector (2) should be placed within the space of controller
pipe (6), power steering controller (4) and stay (5).
IMPORTANTQ
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable first.
W1022962
Muffler Pipe
1. Remove the muffler pipe (1).
W1023136
(1) Bonnet
(2) Connector
(3) Damper
(4) Power Steering Controller
(5) Stay
(6) Controller Pipe
(1) Muffler Pipe
KiSC issued 09, 2008 A

Kubota M8540 Specifications

General

Engine Type	Diesel
Engine Model	Kubota V3800-DI-T
Engine Power	85 hp
PTO Power	72 HP
Drive	4WD
Hydraulic System	Open Center
3-Point Hitch	Category II
Displacement	230 cu in (3.8 L)