Kuka KR C4 - Technical data; Motor cable for 3 motors; Motor cable for 4 motors; Motor cable for 6 motors

15 / 31Issued: 26.03.2013 Version: MA KR C4 extended extern wiring V1 en (PDF)
4 Technical data
4 Technical data
4.1 Motor cables for multiple motors
4.1.1 Motor cable for 3 motors
4.1.2 Motor cable for 4 motors
4.1.3 Motor cable for 6 motors
4.1.4 Extensions
Interface connector X20.1; X20.2; X20.3
Lengths 7 m, 15 m, 25 m, 35 m, 50 m
Cross-section
3x 10 mm
2
Bending radius 100 mm for single bending
Suitable for use in a cable carrier No
Load max. 3x 64 A
Connector type HAN Modular
Outside diameter 27.5 mm, ±0.5 mm
Interface connector X8; X81; X82; X83; X84
Lengths 3 m, 7 m, 10 m, 15 m, 20 m, 25 m,
30 m, 35 m, 50 m
Cross-section
3x 10 mm
2
, 1x 6 mm
2
Bending radius 100 mm for single bending
Suitable for use in a cable carrier No
Load max. 3x 64 A, 1x 40 A
Connector type HAN Modular
Outside diameter 29.9 mm ±0.5 mm
Interface connector X20
Lengths 3 m, 7 m, 10 m, 15 m, 20 m, 25 m,
30 m, 35 m, 50 m
Cross-section
3x 6 mm
2
, 3x 2.5 mm
2
Bending radius 100 mm for single bending
Suitable for use in a cable carrier No
Load max. 3x 40 A, 3x 20 A
Connector type HAN Modular
Outside diameter 30 mm ±0.5 mm
Interface connector X30.1 flexible
Lengths 1.6 m, 2 m, 3 m, 4 m, 5 m, 6 m,
7 m, 8 m, 9 m, 10 m, 11 m, 12 m,
13 m, 14 m, 15 m, 16 m, 17 m,
18 m, 19 m, 20 m, 25 m, 30 m,
35 m
Cross-section
3x 6 mm
2
, 3x 2.5 mm
2