Kurzweil SP5-8 - Tutorials - Multi-Module Zone Parameters; Zone-Specific Parameters for Multi-Module Control

Tutorials
Controlling Multiple Modules with a Single Setup
11-9
Parameter for Each Zone Value
Destination MIDI
Bank Mode Ctl0/32*
Zone Status Active*
Entry Program Change On*
Transpose 0*
Entry Pan 64*
Entry Volume 127*
Low Velocity 1*
High Velocity 127*
Bend Range Down 12 ST*
Rend Range Up 2 ST*
Since we will not be using local sound, the settings for the following parameters are
inconsequential:
Parameter for Each Zone
Local Program
Destination
Zone Status
Entry Program Change
Aux Send Level
Common Parameter
Aux Effect Override
Aux Effect Channel