Program Mode
Selecting Programs
6-2
Selecting Programs
When you are in Program Mode, there a few ways to select Programs.
• By Category—press one of these buttons to select Programs by instrument type or
use the Alpha Wheel and Value buttons to move through the categories.
• Numerically —press the All button and use the Alpha Wheel or Value buttons to
scroll through the available Programs (including User Programs).
• User Programs only—press the User button and use the Alpha Wheel or Value
buttons to scroll through the saved User Programs.
• ID number—press the Keypad Category button and use the secondary function
(alphanumeric entry) of the Category buttons to type the Program ID number, then
press the Enter button. (Press the Keypad Category button again to disable it.)
Program Demo
If you want to quickly hear what a Program sounds like, try the Program Demo Function.
In Program Mode only, pressing the Hybrid and Misc category buttons performs the
Program Demo Function. The Program Demo Function plays the demo song for the
currently selected Program. If you press these buttons from any other Mode, the display
shows the message. Press any button to exit Program Demo.
Press any button to exit Program Demo.
The Display
In Program Mode, the top line of the display shows the current Mode, MIDI transposition
and MIDI Channel. The bottom line shows the Program ID number and name.
To Next Page
Loading...
