Kurzweil SP5-8 - Edit Setup Mode - Zone Configuration; Zone Buttons and Zone-specific Parameters; Local Program and Channel Settings for Zones

Edit Setup Mode
The Zone-specic Parameters
8-6
Setup Zone Buttons
To edit the currently selected parameter, simply use the Next and Previous Value buttons
below the display. Pressing both Value buttons simultaneously will jump to a different
value depending on the parameter—the jump value is mentioned in each of the parameter
descriptions below. Additionally, you can use the secondary numeric functions of the
Category buttons.
The Zone-specic Parameters
Each of the four Zones in Setup has multiple parameters that determine its behavior. Since
the Zones of a Setup are independent of each other, changing a parameter for a certain
Zone will not affect the parameters of any other Zone.
Local Program
The Local Program parameter determines the Program to be loaded for the currently
selected Zone. You can set this parameter to any SP5 Program (0 – 1023). The display shows
the Program number but the name is truncated. Pressing both Value buttons simultaneously
will set this parameter to 1 (1 Pro Piano).
Editing this parameter also changes the MIDI Bank and MIDI Program parameters,
described below.
Channel
The Channel parameter determines the MIDI transmit channel for the currently selected
Zone. You can set this parameter to any of the 16 MIDI channels (1-16). Pressing both
Value buttons simultaneously will set this parameter to 1. You can assign different Zones to
the same channel, but only one Program can be loaded in a channel at a particular time.