Kurzweil SP5-8 - Edit Setup Mode - Zone Control Settings; Bank Mode, Zone Status, and Entry Program Change Settings

Edit Setup Mode
The Zone-specic Parameters
8-9
Differing Program Numbers
Follow the formula on page 8-8.
Bank Mode
The Bank Mode parameter determines the controller number with which MIDI Bank
change messages are transmitted. For MIDI Bank change messages, various manufacturers
have chosen different MIDI controller numbers. Most have chosen 0, 32, or both. In the
case of the Kurzweil K2600, it has its own unique controller number that it responds to.
Pressing both Value buttons simultaneously will set this parameter to Ctl0/32.
You can set this parameter to any of the ve controller IDs:
None MIDI Bank change messages are disabled.
Ctl0 MIDI Bank change messages are sent with controller number 0.
Ctl32 MIDI Bank change messages are sent with controller number 32.
Ctl0/32 MIDI Bank change messages are sent with both controller numbers 0
and 32.
K2600 MIDI Bank change messages are sent with controller number 32.
(K2600 Program numbers 0-99.)
Zone Status
The Zone Status parameter determines whether the currently selected Zone is active or
muted. You can set this parameter to either of two states: Active or Muted. Pressing both
Value buttons simultaneously will set this parameter to Active.
Entry Program Change
The Entry Program Change parameter determines whether or not the currently selected
Zone can send a MIDI Program change message when the Setup is loaded. You can set this
parameter to either Off or On. When set to On, the Zone will send a MIDI Program change
message with the Program specied for the MIDI Program parameter (described above).
Pressing both Value buttons simultaneously will set this parameter to On.