Kurzweil SP5-8 User Manual

Global Mode
The Global Parameters
9-7
Sysex ID
The SysEx ID parameter determines the ID number for the unit if you are using more than
one device with the same MIDI manufacturer ID number. You can set this parameter to any
number from 0 to 127.
Unless you have multiple SP5s receiving Sysex messages from a single source, you will not
need to change the Sysex ID from the default setting of 0.
If you do have multiple SP5s receiving Sysex messages from a single source, make sure each
SP5 has a different Sysex ID. This will allow you to direct Sysex messages to the appropriate
SP5 by specifying which unit with the Sysex ID byte that’s included with every Sysex
message.
To have the unit respond to Sysex messages regardless of the Sysex ID, set Sysex ID to 127.
The Hard Reset? Dialog
CAUTION: PERFORMING A HARD RESET WILL DELETE ALL USER
PROGRAMS AND SETUPS AND WILL RESTORE ALL PARAMETERS TO
DEFAULT VALUES. THIS ACTION CANNOT BE UNDONE.
The dialog allows you to restore factory defaults to the SP5. Pressing the
Next button in this dialog changes the display to Pressing the Next button in the
dialog will result in a hard reset—pressing the Previous button in the
dialog will recall the dialog.
Be sure to save your work to external storage. (See the Dialog below). Once
deleted, the User Programs and User Setups are completely removed from the SP5 and there
is no way to retrieve them.
To exit the Hard Reset dialog, simply select another parameter using the Chan / Param
buttons, or enter another Mode using the Mode buttons.
The Save All? Dialog
NOTE: If the SP5 is currently connected to your computer as a MIDI controller, eject or
Safely Remove it before continuing. Selecting the Save All? Dialog will disconnect any MIDI
device connected via USB.
The dialog allows you to save every User Program and User Setup to a computer
connected to the unit via USB. With the SP5’s power off, connect a USB cable from a
computer to the USB port on the SP5’s rear panel. Power-up the SP5, press the Global
Mode button, then select the Save All? dialog.

Kurzweil SP5-8 Specifications

General

Keyboard number of keys	88
MIDI-keyboard number of keys	- keys
Product color	Black
Pitch bend wheel	Yes
Interface	USB
Headphone outputs	1
Input voltage	15 V
Power source type	DC
Power consumption (typical)	15 W

Weight and Dimensions

Depth	350 mm
Width	1392 mm
Height	120 mm
Weight	21000 g