Kurzweil SP5-8 - SP5 Features - Parameter and MIDI Functions; Parameter Jump, Transposition Reset, and MIDI Program Change

Features of the SP5
Double Button Presses
3-10
Parameter Jump
In Edit Setup Mode only, pressing both the Chan / Param Up (

) and the Chan / Param
Down (

) buttons simultaneously will jump to a specic parameter. See Param Jump Buttons on
page 8-5.
Reset Transposition
Pressing both Transpose + and Transpose – simultaneously will restore the current Program
or Setup to having no transposition.
MIDI Program Change
Pressing the Voices and Mallets category buttons enters the MIDI Program Change
Function page (described in further detail in Program Mode on page 5-1). With the MIDI
Program Change Function, you can send a MIDI Program Change message to any sound
module in a MIDI chain connected to the SP5.