The Operating Modes
Program Mode
5-1
Chapter 5
The Operating Modes
This chapter will help you familiarize yourself with the operating Modes of the SP5. Each
of the ve Modes (Program, Setup, Edit Setup, Global, and System) has its own individual
chapter—the four Functions (Split, Layer, MIDI Program Change, and Demo) are described
in this chapter in Functions on page 5-4.
Program Mode
Program Mode is the default Mode of the SP5. In this Mode, you can select and play
Programs as well as save a Program as a User Program. If you make changes to the entry
values of the virtual parameters by moving the controllers (sliders, Sw button, Mod Wheel),
you can save that Program with its changes as a User Program.
To enter Program Mode from another Mode, press the Program Mode button.
For more detailed information on Program Mode, see Program Mode on page 6-1.
To Next Page
Loading...
