18
Chapter 3. Sound Editing
Chapter 3
3-2-1 Assigning a Button Controller
Tap the Controller field and select the desired Button
(B1-B8) to assign. Selecting a given button displays
that button’s parameters on screen.
3-2 Button Editing
There are eight programmable controller buttons on the
SP7 Grand, labeled B1 to B8. On the “Buttons” Edit
page you can change the Color, assign a Destination,
change the Target, set the Min/Max values, Initial State
and button behavior Type.
3-2-2 Assigning a Button Color
Change the color of the selected button by tapping the
Color tile and, on the following screen, dragging the
small circle about in the color palette wheel.
Adjust the contrast and brightness using the two
adjacent vertical control bars.
On the right you can also select between three groups
of color palettes: The Default color set, a set of Pastels,
and the most Recently used colors. The most recently
used set are automatically saved for convenient
repeated selection.
Press OK to commit your selection.
3-2-3 Assigning a Button Destination
The Destination parameter specifies the function of the
given Button. Tap the Destination field to access the
function assignment page where you will be presented
with 8 Destination types to choose from: System, MIDI
CC, AUX FX, AUX EQ, Zone IFX, Audio FX, Vocal Proc
and Notes.
To Next Page
Loading...
