Kurzweil SP7 Grand - Aux Eq; Zone IFX; Audio FX; Vocal Proc

23
Chapter 3
Chapter 3. Sound Editing
Reverb Size : Controls the size of the reverberant space.
Reverb Level : Controls the amount of reverb.
Reverb Time : Controls the length of reverb decay.
Chorus Level : Controls the amount of the chorus effect.
Chorus Feedback : Controls the level of chorus feedback.
Chorus Rate : Controls the speed of chorus modulation.
Chorus Depth : Controls the maximum detuning range of the chorus modulation.
Cho To Rev : Controls the amount of Chorus fed into the Reverb.
Delay Level : Controls the amount of delay.
Delay Time : Controls the interval of time it takes for the sound to repeat.
Delay Feedback : Controls the amount of delay feedback.
Dly To Rev : Controls the amount of Delay fed into the Reverb.
Dly To Cho : Controls the amount of Delay fed into the Chorus.
EQ Low Gain : This function adjusts the low frequency range.
EQ Mid Low Gain : This function adjusts the low-mid frequency range.
EQ Mid High Gain : This function adjusts the high-mid frequency range.
EQ High Gain : This function adjusts the high frequency range.
3-3-2-4 AUX EQ
The Aux EQ tab offers adjustments covering 4 frequency bands of the Aux EQ:
Output Volume : This function controls the volume level of the post IFX/pre Aux FX signal.
Pan : This function adjusts the left/right balance of the post IFX/pre Aux FX signal.
Reverb Send : This function controls the amount of post IFX sent to the Aux Reverb.
ChoDly Send : This function controls the amount of post IFX signal sent to the Aux Chorus and Delay.
3-3-2-5 Zone IFX (Zone Insert Effect)
The “Zone IFX” tab offers 4 possible destinations governing the IFX Mixer:
Output Volume : This function controls the volume level of the post IFX/pre Aux FX signal.
Pan : This function adjusts the left/right balance of the post IFX/pre Aux FX signal.
Reverb Send : This function controls the amount of post IFX sent to the Aux Reverb.
ChoDly Send : This function controls the amount of post IFX signal sent to the Aux Chorus and Delay.
3-3-2-6 Audio FX
The “Audio FX” tab offers 4 possible destinations governing the Audio Input Mixer:
Lead Process On/Off : This function turns the Lead Processing section on/off.
Auto Harm On/Off : This function turns the Auto Harmony section on/off.
Auto Harm Volume : This function controls the volume level of the Auto Harmony section.
3-3-2-7 Vocal Proc (Vocal Processor)
The Vocal Processor tab offers 3 possible destinations governing the Vocal Processor section: