Kurzweil SP7 Grand - Program; Type; Activate; ARP (Arpeggiator)

31
Chapter 4
Chapter 4. Multi Sound Editing
4-3-2-1-2 Type
Programs in the SP7 Grand are grouped into two broad categories: Sound (non-percussion) and Drum (percus-
sion). The “Type” selector toggles between the category of Programs displayed (Sound or Drum) in the Program
selection field (above). Click on the magnifying glass icon and a pop-up window will appear allowing you to make
a selection.
4-3-2-1-3 Activate
The Activate On/Off switch enables (green) and disables (red) the selected zone.
Tip: Consider assigning “Zone Activate” as a destination to a button/pedal/knob to mute/unmute zones for
convenient use during performance.
4-3-2-1-4 FX Bus
Select the insert FX Bus (A-D) to process the zone. Disable the insert effect by selecting Bypass.
4-3-2-1-5 ARP (Arpeggiator)
Tap the ARP field to assign one of the eight available arpeggiators (A-H) to trigger the current zone. Selecting
None will disable the arpeggiator.
4-3-2-1-6 Transpose
The Transpose parameter shifts the pitches generated by the given Zone. You can transpose up or down in
semitone steps.
4-3-2-1-7 Pan
The Pan parameter sets the panning (left/right stereo placement) of each Zone.
4-3-2-1-8 Volume
The Volume parameter sets the volume of each Zone.
4-3-2-1-9 Destination
The Destination parameter controls the MIDI output routing of the selected zone. The destination can be set as
Local+MIDI (internal sound+external MIDI transmission), Local ONLY (internal sound only - no MIDI output), and
MIDI ONLY (external MIDI output only - no internal sound triggering).
4-3-2-1-1 Program
Select the program for the current Zone. Click the magnify-
ing glass icon to display the program list. You can select the
desired program simply by scrolling through the list.
You can also filter the list by Program and/or Bank Number.
Each Program ID is formatted as XXX-Y where “XXX” =
program number and “Y” = Bank number.
Tap the “Program Num” and/or “Bank Num” field to access
a numeric keypad to apply a filtered search.
Click the “Show All” button at any time to re-display the full
list of available programs.