Kurzweil SP7 Grand - Notes; Assigning a Joystick Target; Assigning a Joystick Min Value; Assigning a Joystick Max Value

24
Chapter 3. Sound Editing
Chapter 3
3-3-2-8 Notes
The Notes tab allows you to select individual MIDI note numbers (#0-127) to trigger from the selected joystick
direction. The selected note will be triggered throughout the joystick throw. The velocity range is determined by
the Min/Max Values. This function can be usefully for triggering percussion hits and sound effects.
3-3-3 Assigning a Joystick Target - ⓐ
A given joystick direction’s operating region is deter-
mined by its Target assignment. Depending on the
chosen Destination, Target selection options can be:
None, Preset, System, Zone1~16, Zone ALL, FX A~D,
FX ALL, Input 1~2 and Input ALL.
3-3-4 Assigning a Joystick Min Value - ⓑ
Sets the minimum adjustable value of the selected
joystick direction (value range = 0-127).
3-3-5 Assigning a Joystick Max Value - ⓒ
Sets the maximum adjustable value of the selected
joystick direction (value range = 0-127).
3-3-6 Assigning a Joystick Initial State - ⓓ
If the Initial State Send is enabled, the Initial State is the
starting value (0-127) applied to the given joystick
direction when a Sound is first selected.
3-3-7 Joystick Initial State Send - ⓔ
With the Initial State Send enabled, the Initial State
value (above) is set as the given joystick direction’s
starting point when a Sound is first selected.