Kurzweil SP7 Grand - 8-3 Global Control; 8-4 LED Color

53
Chapter 8
Chapter 8. Audio Mode
8-2-4 String Resonance
When enabled (switch is green) the String Resonance (String Reso.) dial controls the amount of sympathetic
string resonance generated with the acoustic pianos.
8-2-5 [FXA] to Damper Resonance
When enabled (switch is green) the [FX A] to Damper Resonance dial controls the amount of post FX A signal that
gets fed through the damper resonant effect.
8-3 Global Control
8-4 LED Color
8-5 Demo Song
In Global Control, you can view and edit the global
assignments of the Knobs, Buttons, Joysticks and
Pedals.
Note: once edited, the Controller Override parameter
(Global 1 page) gets auto-enabled and the Global
Control override the individual Sound settings.
The LED Color menu allows you to customize the colors
of all of the non-programmable knobs/buttons on the
front panel: Monitor, Main, Transpose, Alpha Wheel,
Increase/Decrease, Mode and Category buttons.
The front panel controls are divided on screen into two
editing groups, LED 1 and LED 2. LED 1 contains all the
dials and buttons minus the Category buttons and LED
2 contains the grid of 16 Category buttons.
A Default/Custom switch above these two groups
allows you to toggle between the system default color
In the Demo Song menu you can listen to the SP7
Grand’s 9 built-in song demos. Select from the list of
songs and use the transport buttons on the right to
control playback. Enable “Repeat” to play all of the
songs in a continuous loop.
*For detailed settings and contents of Global Control Editing,
refer to the Controller Editing section of Chapter 3 Sound
Editing.
assignments and custom settings.To customize the color for any given control, select “Custom” from the
Default/Custom switch, tap the intended on-screen control, then adjust the color palette wheel, brightness, and
contrast control bars to taste.