Control Functions of Mechanism
22
12. Seat open warning indicator: When this light is lit,
the seat has been opened.
13. Tire Pressure Detection Indicator: After KEY ON,
this indicator lights up if tire pressure is too high or
too low. If tire pressure decreases rapidly, the
indicator flashes quickly; if tire pressure decreases
slowly, the indicator flashes slowly.
14.
Parking brake indicator: When this light is lit, the
parking brake is locked.
15. Instant fuel consumption display: The instantaneous
fuel consumption is calculated for display reference
according to the throttle openness.
There are three fuel consumption unit selections of km/L,
L/100 km, and MPG. They must be set from the APP.
(When TRIP A is reset, the average fuel consumption
will also reset.)
When selecting Mile Gauge, the displayed unit is MPG,
i.e. miles per gallon.
The Average Fuel Consumption or Instant Fuel
Consumption of the vehicle displayed by the meter is
for reference only. The actual fuel consumption is
dependent on the actual vehicle behavior.
16. ABS warning indicator: The light should be
turned off during travelling, indicating the ABS
braking system is in operation. If the light stays lit
during travelling, and cannot be resolved, please visit
the dealer shop for repairs.
If ABS Fault Indicator stays lighting up when vehicle
speed is ≧ 6km/h, it indicates the ABS system is faulty.
Please go to a local KYMCO dealer for check-up
immediately.
To Next Page
Loading...
Need help?
General
