E. Fill the engine with oil and install the oil filler
bolt.
F. Start the engine and warm up for a few
minutes. While warming up, check for oil
leakage. If oil leakage is found, stop the
engine immediately and check for the cause.
Recommended oil : See page 138 or 142
Oil quantity:
Periodic oil change:
0.11L (0.10Imp qt, 0.12US qt)
Total amount:
0.12L (0.11Imp qt, 0.13US qt)
Be sure no foreign material enters the
crankcase.
CAUTION:
Tightening torque
Oil filler bolt:
15 Nm (1.5 m-kg, 11 ft-lb)
1. Oil filler bolt ( 50R)MXER
(1)
(1) Oil filler bolt ( 90R)MXER
(1)
101
To Next Page
Loading...
