Chain
Check the general condition of the chain and
check the chain slack before every ride.
Lubricate and adjust the chain as necessary.
(See pages 118~120 for details.)
Lights
Check the position light and taillight/stop light to
make sure they are in working condition. Repair
as necessary for proper operation.
Switches
Check the operation of the
switch, engine stop switch, remote engine stop
switch and any other switches.
Repair as necessary for proper operation.
taillight/stop light
Throttle lever
Check to see that the throttle lever operates
correctly. It must open smoothly and spring back
to idle position when released. Repair as
necessary for proper operation.
Fittings and fasteners
Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine to
a KYMCO dealer or refer to the Service Manual
for correct tightening torque.
46
To Next Page
Loading...
