EasyManua.ls Logo

KYMCO MXER 50R - Engine Oil ( MXER 50 R)

KYMCO MXER 50R
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If the low oil level indicator comes on while
riding, stop riding and shut the engine off. Fill
the oil tank to the upper level mark with the
recommended oil. Continuing to ride with a
low oil level may lead to engine failure that
could result in an accident.
if the engine has been run after the low oil
level indicator has come on, the scooter must
be taken to an authorized KYMCO dealer for
inspection and bleeding of the oil system.
Failure to do this will result in serious engine
damage.
Engine oil ( 50R)
Oil level
When the low oil level indicator lights, it means
the oil level in the oil tank is low; stop the engine
and fill the oil tank as soon as possible.
MXER
To fill, lift seat (see page 38), remove the cap
from the oil tank, and fill with the recommended
oil up to the upper level mark.
45
CAUTION:
(1) Cap (2) Upper level mark (3) Fill duct
(1)
(2)
(3)
Oil recommendation :
Use KYMCO 2-STROKE OIL OR ITS
EQUIVALENT
CAUTION:
The use of improper oils may cause excessive
and/or premature carbon build-up in the engine
and exhaust system, resulting in loss lf power
and possible engine damage. Genuine KYMCO
2-Stroke Oil has been specifically designed
and tested in KYMCO ATV and is a proper oil.
When filling, do not let dirt or other foreign
materials enter the tank.
NOTE:

Table of Contents

Related product manuals