KYMCO MXER 50R - Page 31

km/h km/h
22
3. Default setting or resetting the unit
W．
．When the MODE button and ST./STOP button
are pressed simultaneously and press the
ST./STOP button. The indicator on the display
will change between km/h & mile/h.
Press the MODE button and press the
ST./STOP button to setting wheel
circumference, the body to set wheel
circumference is
(MXER 50R: 1400mm) (MXER 90R: 1570mm).
Press the MODE button and press the
ST./STOP button to setting clock.
hen the MODE button and ST./STOP button
are pressed simultaneously and press the
ST./STOP button to setting auto
symbol.("ODO" Mode)
．
．
mile/h
km/h
km/h
AUTO
km/h
MXER 50R MXER 90R